How to Fix Scratched Floorboards: Repair Methods by Scratch Depth

Get A Free Quote

How to Remove Scratches from Timber Floors

Run a fingernail across the scratch. If you cannot feel it, clean the floor and use a timber floor refresher or touch-up polish. If you can feel it but see no raw timber, fill it with a colour-matched wax stick and seal it if the finish needs it. If you see raw timber or the nail catches hard, the finish is breached: spot-repair, recoat or sand, depending on how many boards are affected.

To quickly remove surface scratches from scratched floorboards, clean the area thoroughly and apply a specialised wood finish restorer, a colour-matched wax stick, or even a simple walnut kernel for minor marks. For deeper scuffs that penetrate the polyurethane or hard-wax oil coating, a light spot-sand with fine-grit abrasive paper followed by a fresh application of protective sealant will seamlessly blend the blemish into the surrounding floorboards.

Addressing scratched timber flooring promptly is vital to prevent moisture ingress from permanently greying and damaging the underlying timber fibres. In Melbourne’s dynamic climate where gritty dirt tracked from rainy winter streets meets heavy household foot traffic regular upkeep ensures your hardwood floorboards remain resilient.

The diagnostic guide and quick-reference table below will help you identify your exact scratch type and apply the most effective repair method without delaying your home’s visual appeal.

Scratch Severity Visual & Physical Symptoms Best DIY or Professional Fix Required Tools & Materials
Minor / Micro-Scratches Faint surface dullness; only visible at certain light angles; fingernail glides over smoothly. Refresh & Buff: Apply a commercial timber floor refresher or rub with a raw walnut kernel. Microfibre mop, hardwood floor reviver polish, raw walnut or almond kernels.
Moderate / Finish Scratches Visible white lines where the top protective finish is cut, but raw timber colour underneath is undamaged. Fill & Seal: Clean the mark, buff lightly with fine steel wool, and apply a dab of matching polyurethane or wax. #0000 grade steel wool, colour-matched wax fill stick or putty, artist paintbrush, sealant.
Deep Gouges & Dents Sharp indentations cutting through the sealant into raw wood; rough edges catching fingernails; dark or grey exposure. Sand & Recoat: Sand back the immediate damaged boards, fill deep cavities, and re-apply finish coats. 180–240 grit sandpaper, wood filler putty, vacuum, polyurethane or hard-wax oil finish.
Widespread Surface Wear Large traffic corridors with high scuff density, dull patches, and extensive micro-scratching across multiple rooms. Professional Screen & Recoat: Machine sanding of the top coat layer followed by a complete floor refinishing. Rotary buffing screen, dust extractor, professional-grade floor sealant (best left to specialists).

How to Fix Scratched Floor Boards: Step-by-Step Restoration

The secret to learning how to remove scratches from a timber floor is to match the level of repair with the level of damage. If aggressive sanding is done on a superficial scuff, too much finish may be removed, resulting in a blotched appearance that is more noticeable than the original scuff. The following is a step-by-step guide to repairing scratches in Australian hardwood floors, including Spotted Gum, Blackbutt and Tasmanian Oak.

Step 1 : deep preparation and degreasing
Don’t try to buff or fill a scratch on a dirty floor. The hundreds of new micro-scratches formed by microscopic sand and grit stuck on the surface will act like a liquid sand paper under a buffing cloth.

  • Vacuum Thoroughly: Thoroughly vacuum the scratch channels to remove dust, but not by scraping the floorboards around the channels.
  • Use pH-Neutral Cleaner: Use a hardwood floor cleaning tool with a microfibre cloth soaked in a pH-neutral hardwood floor cleaner to clean the affected area. Do not use regular supermarket floor washing solutions or dishwashing detergents, which create a cloudy residue, that will not allow repair waxes and polyurethanes to adhere properly.
  • Dry Completely: Let the wood dry thoroughly (a minimum of 30 minutes) prior to use of repair compounds.

Step 2: Treating Minor Surface Scuffs (The Natural & Chemical Methods)
When the fine scratches only discoloured the top gloss of the polyurethane or hard wax oil, but not into the wood fibre:

  • The Walnut Trick: Use a raw walnut or almond kernel to rub the diagonal of a medium to dark wood to cover over small scratches. The friction of the natural oils and organic brown dyes in the nut will heat up in this tiny crevice and darken the exposed finish line to the point where it’s no longer visible to the naked eye. After 10 minutes, remove the excess oil by buffing with a clean, dry lint-free cloth.
  • Commercial Timber Polish : Use a special water-based timber floor polish if there is a particular area of high scuffing (e.g. by the kitchen sink, hallway by the door). Use a microfibre applicator pad to apply a thin even layer. Optical brighteners and micro-resins contained in the reviver will fill in the surface scratches, creating a uniform sheen to the whole board.

Step 3: Fixing Medium Scratches (Wax Putty & Fillers)
If a sharp object (like a stone that became trapped in the shoe’s tread or a dropped utensil) has penetrated the protective finish coat and caused a white streak to show through:

  • Light Abrasive Prep: Slightly rub the immediate scratch line with the extra-fine 0000 grade steel wool or 1500 grit abrasive pad. Do not buff in the cross-grain or circular direction—the buffing should be in the same direction as the timber grain. This eliminates any rough, jagged, flaking of old polyurethane that has been used around the cut.
  • Use Wax Fill Stick: Choose a hard wax timber repair stick or pigmented acrylic wood putty which closely matches its natural tone – for example, golden straw for Blackbutt, deep red/brown for Jarrah. Using a plastic putty knife, firmly press the wax into the scratch channel, removing any excess wax that is level with the floor surface.
  • Finally Seal the Repair: After the wax or putty has set, use a fine artist’s paintbrush to gently dab a small amount of the same clear polyurethane (matte, satin or gloss) right over the line. Allow to set for 24 hours without disturbance.

Step 4 : Repairing Deep Gouges and Dents
If heavy furniture dragging or structural impact has made the timber fibres crush and the raw, unprotected wood is showing through:

  • Isolate the Board: Use low-tack painter’s tape around outside edges of damaged board to prevent accidental sanding scuffs to adjacent boards that are not damaged.
  • Spot Sanding: Sand the rough edges of the gouge until they are smooth by wrapping 180-grit sandpaper around a small wooden sanding block and carefully sanding the damaged area. Smooth with 240 grit paper to blend edges in with the surrounding finish.
  • Deep Dent: Use a stainless-steel scraper to apply a wood grain filler that can be stained. Fill hole just over full to allow for shrinkage when drying. After the patch is completely dry, sand it flat with the surface of the board.
  • Re-Staining and Coating: If the floor is stained with a custom stain, use a cotton swab to apply a small amount of wood stain to the area, being careful not to use too much and to wipe it off right away. Lastly—two to three thin coats of a protective sealant (water-based polyurethane, solvent-based polyurethane or penetrating oil), lightly sanding between coats with 320-grit sanding paper for a super factory finish.

How to Remove Scratches from Hardwood Floors

How to Tell What Type of Damage Your Timber Floor Has

Not all marks appearing on a timber floor are scratches and not all scratches need to be sanded. The first step is to determine whether the protective finish or the wood itself is damaged or whether it is just the surface that is damaged.

Knowing the type and extent of damage will help to decide if the floor needs cleaning, maintenance treatment, spot repair, recoat, sand or full restoration.

Scratch

A scratch is any line or lines formed by the removal or damage of part of the floor surface caused by the movement of an object across the floor.

A light scratch could only damage the protective coating, a deeper scratch may damage the paint and the wood underneath.

Typical signs:

  • The line that is apparent and extends in the direction of travel.
  • The mark can look white, whiter or darker than the rest of the floor,
  • A deeper scratch can be felt when the nail is scraped across the surface.
  • Lighter or bare wood may be observed in more severe damage areas.

Scuff Mark

A scuff is not a scratch. This is typically a friction transfer or a surface grinding from rubbing with rubber, shoes, furniture or other items on the floor.

  • In some cases, it may be possible to remove scuff marks by appropriate cleaning, instead of sanding the timber.
  • If the surface appears even, and the mark does not seem to penetrate the finish, hardcore sanding may not be required.

How to Remove Black Scuff Marks from Timber Floors

Black scuff marks are often caused by rubber soles, shoes or furniture rubbing against the floor rather than actual scratches in the timber. Start by removing loose dirt, then gently wipe the mark with a clean microfibre cloth and a pH-neutral cleaner suitable for your floor finish. Always test the cleaner in an inconspicuous area first. Avoid abrasive powders, harsh chemicals and excessive scrubbing, as these can damage the protective coating. If the mark remains, professional assessment may be needed.

Dent or Indentation

  • A dent is a hole in the timber, not a line cut into the timber.
  • May arise if the timber is overloaded by heavy furniture or dropped items, or when high heels or high concentration of loads are applied.
  • The difference is that the timber is compressed and not just marked.

Gouge

  • A gouge is a more serious damage that occurs when a piece of the timber or finish has been completely removed.
  • Gouges are normally deeper and wider than ordinary scratches and may expose the raw timber.
  • They can be filled, repaired locally, sanded or replaced with new board depending upon their depth and location.

How to Fix Scratches on Veneer and Thin-Wear-Layer Floors

Not all timber-look floors can be repaired in the same way. Solid timber and engineered flooring have different repair limitations, particularly when the engineered board has a thin real-wood wear layer. Before attempting to sand a scratch, check the floor construction and manufacturer’s specifications. Light surface marks may be treated with approved touch-up products, but scratches that penetrate the veneer or decorative layer may require specialist repair or board replacement. Never assume a thin veneer or laminate surface can be sanded like solid timber.

Quick Diagnosis

What you see What it may be Typical response
Faint line that cannot be felt Surface scratch Cleaning or maintenance treatment
Line that can be felt slightly Deeper finish damage Assessment and possible spot repair/recoating
Raw timber visible Deep scratch Professional repair or sanding may be required
Smooth black/grey mark Scuff Appropriate cleaning
Visible depression Dent/indentation Timber repair or professional restoration
Timber has been removed Gouge Filling, repair or board replacement

The key is that, not just seeing a mark, will tell you how much damage is done. Before choosing a repair method, the depth of the damage, existing finish, the species and condition of the surrounding floor should all be taken into account.

Colour matching by species

Floor Wax stick or touch-up tone Note
Jarrah, Merbau, Sydney Blue Gum Deep red-brown Dark floors show light fills; scratch-cover polishes made for dark timber exist
Blackbutt Golden straw Existing page text
Spotted Gum Mid brown; blend two shades Colour varies board to board
Tasmanian Oak Light honey Fill slightly lighter, never darker

The Long-Term Benefits of Timely Repairs

While it may be easy to dismiss a scratch on your timber floor as a harmless cosmetic blemish, leaving damaged areas of the floor untreated can have a serious impact on the structure and cost of your home over time.

Moisture Ingress and Grey Rot Prevention

Once a scratch breaches the finish, spills and damp mopping can reach bare timber. In tannin-rich Australian hardwoods this can leave dark staining, and repeated wetting can swell board edges. Light staining sometimes sands out; deeper staining may need professional treatment or board replacement. Touch up or seal exposed timber promptly.

Protecting structural thickness and longevity.
Engineered timber flooring has a real-wood wear layer that varies in thickness depending on the product. The number of times it can be safely sanded depends on its construction and the manufacturer’s specifications. Solid timber floors generally offer greater sanding flexibility, while engineered boards with thinner wear layers may have limited refinishing options. Always check the product specifications before attempting extensive sanding.

According to Bona, recoating is a preventative maintenance option that can refresh a timber floor’s protective finish, restore its sheen and help extend its service life. It can address surface scratches without removing the entire existing finish, helping preserve the timber layer. However, deeper scratches or more extensive damage may require full sanding and refinishing.

Enhancing the value of the property and its appraised worth.
A well-appointed property has a lot of features that have a high rate of return in the competitive Australian real estate market, and immacate timber floors are one of them. Scuffed, scratched and dull floor boards are a red flag to prospective buyers when they step on them, and they immediately start to cut back on their bid because they assume the full price of a new floor. On the other hand, if you have a glowing, well-sealed wooden floor, you will have a hygienic, warm and luxurious floor, which will enhance the value of your property and make it easier to sell.

Scratch repair products

Most hardware stores sell timber repair crayons or wax sticks in several tones, cleaner-polishes for light marks, and scratch-cover polishes for dark timber. Pick the product to suit the finish: wax sticks for filled scratches, polish for surface dullness, and a matching clear coat for any sealed repair. Always test in a hidden area first.

How to Remove Scratches from Timber Floors

Not Every Timber Floor Scratch Requires Sanding

Sanding is not the first answer. Light marks and scuffs that sit in the finish can often be cleaned, buffed or recoated. Sanding makes sense when scratches reach bare timber across several boards, the finish has worn through in traffic areas, or a recoat will not bond. Bona Australia advises recoating before the finish wears through and says a floor maintained that way should almost never need sanding back to bare timber.

Bona Australia recommends regular timber-floor maintenance, including preventing scratches, using suitable cleaning and protective products, and recoating the floor before the existing finish wears through. Keeping the protective finish in good condition can help reduce the need for sanding the timber back to bare wood.

Common Problems and Mistakes When Fixing Scratched Floors

The replacement of hardwood floorboards is a technical job. Owners who try to fix up the house themselves on the weekends often end up with additional problems because of common mistakes that will worsen the condition of the surface damage and introduce an unsightly looking patch. These are common errors of the industry to steer clear of:

1. Using supermarket waxes and silicone polishes.
One of the most harmful errors is to use “spray and wipe” furniture polishes, oil based soaps, or silicon based shine restorers on sealed timber floors. These products give an instant artificial shine, but they leave a thick silicone layer on the polyurethane surface.
This film is a contaminant trap which picks up dirt every day and becomes cloudy within weeks. Silicone residues are worse still, for when it comes time to professionally recoat floors, new layers of polyurethane will chemistry reject and bead up over silicone residues (a flaw dubbed “fisheying” in the trade), driving contractors to hire a costly bare-wood sand to remove the contamination completely.

2. If you’re looking to add a fresh layer of sand to fill the cracks and fissures in an existing sanding, Sanding across the grain

 Many homeowners take the time to sand out a scratch in a circular or cross-grain motions to remove the mark quickly, using aggressive grits (80 or 100 grit) when sanding out a localized scratch. The breaking of the wood fibres across the grain causes deep scratches or cross hatches that will serve as dark reservoirs for any topcoat or stains. Only use fine abrasives (180 grit or finer) and sand in the direction of the timber’s straight grain.

3. Steam Mops on SCRATCHED FLOORS
Steam mops are heavily promoted for home floor cleaning, but high-temperature steam on scratched timber floors will be disastrous. When the surface sealant is broken, the hot steam from the mop will be pushed directly into the raw wood grain. This high heat and moisture can cause a quick localized swell that can produce board cupping, flaking finish edges and permanently raised grain.

4. Improperly Matching Paint Color to the Original.
Choosing the wrong sheen level when applying ‘touch-up’ polyurethane over a repaired scratch will make the repair pop out from the natural light. For a contemporary matte or satin floor (approx 15-30% gloss) a small amount of sealant is applied as a spot dab and will create a shiny reflective area that will immediately attract the eye. Test the touch-up sealant in a hidden spot, like a pantry or linen closet, to make sure the dried surface is as close to the color of your surrounding floor as possible.

How to Prevent Scratches and Do It Right

The best way to deal with a scratched timber floor is to prevent abrasion damage. A strategic preventative maintenance strategy will help to maintain the protective coating on your floor and reduce wear in high traffic living corridors.

Learn the Defensive Entryway Set-Up
80% of household scratches on the floor come from dirt, quartz sand and small pebbles brought in on the soles of shoes from outside the house.

  • Dual-Mat System: Place a doormat with a coarse construction that is scarped to remove dirt and mud from shoes outside the porch, and a barrier mat with a soft and absorbent surface immediately inside to catch fine dust and moisture.
  • No-Shoes Policy: Ask members of the family and visitors to remove shoes at the door. In particular, a high-heeled stiletto can put up to 100 times the pressure per square centimetre that an elephant puts on its foot – one exposed metal heel nail alone can dent and gouge up to 40 linear metres of timber flooring in a few seconds.

Use Area Rugs and Runners in High-Traffic Areas

Placing area rugs and runners in busy hallways, entryways and living spaces can help reduce everyday wear and scratches on timber floors. Choose rugs with non-staining backing or floor-safe underlays compatible with your timber finish. Regularly lift and clean underneath rugs to prevent trapped dirt and grit from scratching the floor surface.

Protect Furniture Contact Points
Any piece of furniture that is mobile can be a floor gouging tool when it’s not properly protected.

  • Heavy Duty Felt Protectors: Place thick wool-blend felt protectors on the base of all dining chair legs, bar stools, tables and even sofas. Check these pads every six months, since over time themed material can be worn into the pad and make a pad that should be a protector into a sanding disc.
  • Castor Wheel Upgrades: Substitute hard plastic or metal castor wheels on office desk chairs with soft wheels made of a polyurethane which is designed to be used on hardwood floors or use a protective polycarbonate floor mat under desk areas.

Create a Safe Daily Cleaning Routine:

  • Opt for Soft-Bristle Brooms or Vacuum Brushes: Vacuum or use a static microfibre dust mop every day on your floors, as both tools have soft bristles. Avoid vacuuming using a spinning beater bar or hard plastic wheels since this will beat and scratch the finish coat while vacuuming.
  • Manage Indoor Humidity: Melbourne’s Climate can be quite extreme and humid in summer and cold in winter. Adjust relative humidity within the home by means of heating and cooling to 40-60%. This stability in the seasons keeps timber board from shrinking, leaving large gaps where the prone-to-scratching and chipping edges of a polyurethane finish can fit into.

How to Remove Scratches from Timber Floors

Can You Repair Scratches on a Timber Floor Yourself?

Depending on the degree of damage, the right solution needs to be implemented.

It might be okay to attempt a DIY solution for minor surface damage.

Simple maintenance can be adequate if the surface of the floor is lightly marked and the timber is not damaged.

Suitable maintenance usually involves making sure the dirt and grime is cleaned up and that the floor surface is not damaged any further or that the existing floor finish is not damaged by the cleaners used.

It is especially essential to remove grit regularly as grit which is carried onto the floor may act as an abrasive and cause scratching.

For deeper scratches, it’s better to take the time to hire professionals to fix it.

When: Professional assessment is recommended when:

  • The scratch is when the timber is exposed.Scratch is when the timber is revealed.
  • A fingernail is lodged deeply in the damage.
  • There are multiple boards that are impacted
  • The floor has extensive wear
  • The type of finishing is not known.
  • Don’t know if floor is solid or engineered timber
  • Colour matching will be needed
  • The floor needs to be sanded or refinished.

If you sand a small area aggressively a visible patch will be in the floor, which might be different colour, texture or sheen from the rest of the floor.

It is for this reason that deeper scratches are typically not looked at just as a cosmetic issue, but as part of the overall floor.

Dents versus scratches

A dent is compressed timber, not a cut line. Small dents can sometimes be lifted with a damp cloth and gentle heat. Test a hidden spot first because heat can cloud some finishes, and do not use it on thin-wear-layer engineered boards unless the maker allows it.

Scratches in a rental

Photograph the marks, fix only light surface scratches with a wax stick, and talk to the property manager before trying anything deeper. A sanded patch on an aged floor usually shows more than the original scratch because the surrounding finish and colour have faded.

Jarrah floorboards

Jarrah scratches show white against its deep red-brown colour, so colour-matched fill and a matching sheen matter more than on lighter species. For a whole Jarrah floor that is worn rather than scratched, see our floor restoration guide.

When to Hire a Professional Flooring Specialist

There are effective remedies for superficial scuffs and surface scratches, such as DIY waxes and reviver, but there is a line to be drawn at that point where home remedies are no longer an option. It is difficult to spot repair a large area of damage in open plan living spaces and it can lead to a patchwork seams that detract from the architectural beauty of your home.

A professional floor restoration tradesperson should be called in when:

  • Damage is widespread: If you’ve got heavy traffic wear paths, peeling finish, or thousands of interlocking micro scratches in your main hallways, kitchen dining rooms or living rooms, then spot filling is impractical.
  • Gouges Penetrate the Core: If the strong impact has caused the timber board splitting and crushing from several planks of the floor, then wood grain reconstruction and machine sanding must be done professionally to restore the structural integrity.
  • Finish is flaking or peeling: When large sections of polyurethane flake off a bare wood, the original polyurethane has lost its chemical bond to the wood surface. It is essential the whole floor is professionally stripped back to bare timber and re-sealed.
  • If you need to make your home look modern and up to date, and want to change from a yellowed, solvent-based gloss to a raw-timber Scandinavian matte finish, only drum-sanding machines designed for such work and commercial dust extraction systems can do this job.

If you are a homeowner and live in the eastern suburbs and need your timber floor polishing Melbourne project completed with precision, without the mess and dust of traditional sanding, it is important to hire professionals who offer factory-grade smoothness and durable coating finishes.

Likewise, if your property has the traditional Australian hardwoods which demand thorough timber leveling, deep scratch removal and multi-coat protective sealing, it is best to seek out the local experts in Floor Sanding Donvale to ensure that your timber restoration is carried out correctly with regards to the local environment and humidity requirements. A specialist in Timber Flooring Melbourne is all you need to restore your floors to perfection, as they bring with them the heavy industrial equipment, top quality commercial sealants and timber species knowledge you will need.

Looking to get your timber floors looking brand new again?
Natural beauty and value don’t have to be sacrificed because of ugly scratches, poor traffic flow or deep furniture indentations. From the best advice for maintenance of your existing floorboards to the most extensive sanding and polishing restoration, you can count on us to have your back.

Call us today for a free on-site floor inspection and quotation. Our experts can determine the species of your timber, the wear and tear levels of the surface and give you a customised restoration plan to bring the stunning, showroom finish back to your home’s flooring!

FAQs

Can I remove scratches from timber floors without sanding?

Sometimes. If the damage is limited to the surface finish or is actually a scuff mark, cleaning, maintenance or recoating may be sufficient. Deeper scratches that penetrate into the timber may require sanding or another repair method.

How do I know if a timber floor scratch is deep?

Run your fingernail gently across the mark. If it cannot be felt, it may be a superficial surface mark. If the nail catches clearly or raw timber is visible, the damage is deeper and should be assessed before attempting a repair.

Do dog scratches always require sanding?

No. Light marks may be limited to the protective finish and may be treatable through maintenance or recoating. Deeper scratches or repeated damage across a larger area may require professional restoration.

Does every scratched timber floor need to be completely refinished?

No. The required treatment depends on the depth and extent of the damage, the existing coating and the condition of the rest of the floor. A local repair or maintenance treatment may be appropriate for minor damage, while extensive wear may justify broader sanding and refinishing.

Can a single scratch be repaired without sanding the whole floor?

In some cases, yes. However, local repairs can create differences in colour, texture or sheen, particularly on older floors. The surrounding finish and age of the floor should be considered before choosing a spot repair.

Are harder timber species scratch-proof?

No. Harder species generally provide greater resistance to indentation and abrasion, but no timber floor is completely scratch-proof. Surface grit, furniture movement, pet claws and other abrasive forces can still damage the floor.

Can engineered timber floors be sanded to remove scratches?

It depends on the construction of the product, particularly the thickness of its timber wear layer and the manufacturer’s specifications. Engineered timber floors should not automatically be treated in the same way as solid timber flooring.

Will sanding remove deep scratches?

Sanding can remove many forms of surface and timber damage, but the amount of material that can safely be removed depends on the floor construction and depth of the damage. Very deep gouges may require filling, board repair or replacement rather than simply sanding deeper.

What is the difference between a scratch and a scuff?

A scratch physically damages or cuts into the surface, while a scuff is generally a surface mark or transfer caused by contact and friction. A scuff may be removable through suitable cleaning, whereas a genuine scratch may require repair depending on its depth.

What is the best way to prevent scratches on timber floors?

Use entrance mats, remove grit regularly, place felt protection under furniture, avoid dragging heavy objects, keep pet claws trimmed and maintain the protective coating before it becomes excessively worn.

Can I fix a scratch in a rental floor?

Use the rental paragraph above.

Is touching up as scratches appear better than waiting to refinish?

Reader question from the comments; reuse the existing reply.

Get A Free Quote

Share this post

4 Responses

  1. I noticed a few long scratches on our timber floor after moving a heavy cabinet and wasn’t sure whether the floor needed to be completely sanded. This article helped me understand the difference between a surface scratch and deeper timber damage. The part about checking whether the scratch can actually be felt with a fingernail was particularly useful.

    1. That fingernail test can be a useful first check. If a scratch is only affecting the surface finish and you can barely feel it, a full sanding may not be necessary. Deeper scratches that catch a fingernail or expose the bare timber may require more involved repair, depending on the flooring and finish.

      It’s also worth checking the area in good light before deciding on a repair. Sometimes a local touch-up or recoating is enough, while widespread or deeper damage may justify sanding and refinishing the floor.

  2. I’ve noticed a few shallow scratches appearing on my timber floor, especially around the dining area. Is it better to touch up small scratches as they appear, or wait and refinish the whole floor?

    1. For a few shallow scratches, there’s usually no need to refinish the entire floor straight away. Minor surface marks can often be cleaned and treated with a suitable timber-floor maintenance or touch-up product, depending on the type of finish.

      If scratches are becoming widespread, penetrating the finish, or the floor is showing general wear and dullness, a professional assessment can help determine whether sanding and refinishing is more appropriate. It’s also worth addressing the cause of the scratches, such as grit under furniture or dining chairs, to prevent them from becoming more noticeable.

Leave a Reply

Your email address will not be published. Required fields are marked *